WEET Shares Best Music Capacitor "Sound" in Hifi Collective and Audiophile Capacitors MusiCaps

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET Shares Best Music Capacitor "Sound" in Hifi Collective and Audiophile Capacitors MusiCaps

https://www.musicaps.com/WEET-Full-Range-of-Audio-Capacitors-Customer-Testimonials.html

https://www.enjoyen.com/

Conclusion: Yes it's worth it!, the enhancement with WEET WMH 100V 200V Pure Aluminum Foil and Polypropylene Film Capacitors for tweeters provides a superior, polished audio that takes serious listening to an even higher experience.
 --- From Christian Karlsson, Sweden

The ones I used are the WMH series, which are aluminum foil and polypropylene film capacitors, and made to compete directly with the highly regarded Jantzen Audio Alumen Z 100V capacitor, almost the exact same dimensions, but at a much lower cost.

The left (upgraded with WMH)  side sounds more like it is in stereo, more depth with natural ambient cues, more height sensation, instruments and vocals in their own space, whereas the right is a flatter sound, everything gets a little bunched up, it's a lot more obvious that only a single speaker is playing.
 --- From Dave Ingels, USA

A blind comparison of the effect on the sound of WEET WMH Pure Aluminum Foil Capacitor and Jantzen Alumen Z-Cap capacitors on two identical pairs of speakers。WEET WMH sounded more contrasting, dynamic, more assertive, especially on rock
 We can definitely say that the WEET manufacturer managed to create a very high-quality, noteworthy capacitor with an excellent price/quality ratio.
 --- From Alexander, Russia

These WEET WMH capacitors achieve an unbelievable high sound quality:the openness, depth, and width of the soundstage, the pinpoint precision, and the realism with which the music is reproduced are of such high quality that at times, I genuinely feel like the musicians are performing in my living room.The WEET WMH capacitors are not just very good; they are a MUST for anyone who wants to build or modify a crossover filter in such a way that there is no doubt about achieving a realistic reproduction.
 With the WMH capacitors, you can be certain that at least capacitor quality won't be the limiting factor!
 --- From Alex Bartels ,The Netherlands

I tested the WEET aluminium foil capacitors against the stock capacitors and a vast choice of Russian capacitors and Jupiter copper foil capacitors.The WEET Aluminum Foil capacitors clearly outperformed the stock capacitors and all the Russian capacitors in terms of detail and rhythm. Bass was tight, mids having good tonal balance and natural highs.Aluminum foil are very recommendable capacitor.It was only outperformed by copper foil Jupiter Capacitor.Copper foil was giving even more details and adding more colors in music but they are much more costly.
 ---From Lorenz Slansky, Germany

I will test your aluminum and copper capacitors for 100 hours and write my opinion . I liked both types of WEET Capacitors, both aluminum foil WMH and copper foil WMW for their sound neutrality. Caps with aluminum foil WMH are an absolutely bargain!Copper foil capacitors WMW create music with a great sense of realism, with a good balance between transparency and timbre.Excellent ratio of sound performance to cost !Undoubtedly ,these will find your rightful place along with Jupiter and Jantzen, which , however are much more expensive. WEET Capacitors, Highly recommended !
 --- From Alex Tsoupikov, Italy

WMH in there sound signature is very similar to Alumen capacitors with similar instrument timbre. The sound attack is stronger on Alumens (more edgy), WMH are smoother but only little bit. Main difference is in tonal balance. Where AlumenI could call dark capacitor, the WMH are neutral. Because there are slightly brighter so there are more spacious. Sound stage is wider but Alumen sound stage is a bit deeper.Jupiter is more spacious than this two, more smooth and the timber is even better but it is clearly more expensive capacitor. Clarity Cap CMR is brighter in this comparison with very wide sound stage and lots of detail in highest frequencies but clearly tone and instrument timbre it’s not the same level as the aluminium capacitors.
 In direct comparison sounds a bit plastic. Mundorf Supreme EVO Oil it’s totally not my taste. They doesn’t sound right. Because there too bright on top end and timbre is very artificial and too sweet. The other caps are not in the same league as those I mentioned above. So my conclusion is that WMH are absolutelygreat capsinthereprice range. No brainer. In my opinion, of course.
 --- From Rafal Broncel, Ireland

Measured 5 of them (WMH) and they had a very good tolerance. 10.15 , 10.14, 10.145  were the first three. Very please with tolerance.
 --- From James Plumb, USA

Hello again.I recived parcel yesterday. Alleredy I mount one pair of yours capasitors i midrange circut.
 Your capasitors plays allredy about 10 hours and I find this very promissing!
 I had before jantzen alumen but on some others speakers. Yours capasitors sounds exactly the same on this moment. Thats why I hope that after burn-in process will be even better. I have an idea to use your WMH capasitor in complete midrange circut.
 --- From Chamczyk Mateusz，Norway

WMH: A lengthy axial film and aluminium foil capacitor, the WMH is aimed at the high frequency network of expensive loudspeaker designs. The size, weight and appearance are all impressive and give an excellent‘static value’ impression.
 --- From Mr Stefan Whatcott, United Kingdom